• 1
    In order to use the Timeline to synchronize events to an audio file the file must be set as Narration. To confirm this, select the audio file on the stage.
  • 2
    Select the Options tab.
  • 3
    On the Options tab you can see the Set as Narration button has been selected. Select the Timeline tab below the Stage.
  • 4
    Select the blue bar beside the first image.
  • 5
    The bar turns dark blue. It also now shows handles at both ends as well as a pencil icon at the left end. Select the handle at the left end and drag it to the 1-second mark.
  • 6
    This sets the image to appear at 1.0 seconds, based on the audio file.
  • 7
    Select the pencil icon.
  • 8
    Select the Entrance Effect drop down list.
  • 9
    Select Slide.
  • 10
    Select the Up icon to set the direction of the Slide entrance effect. Leave the Duration set at 0.5 - this is how long the Slide effect will take to complete.
  • 11
    Select Apply.
  • 12
    Select the blue bar beside the second image.
  • 13
    Select the handle at the left end and drag it to the 2-second mark.
  • 14
    This sets the image to appear at 2.0 seconds, based on the audio file.
  • 15
    Select the pencil icon.
  • 16
    Select the Entrance Effect drop down list.
  • 17
    Select Slide.
  • 18
    Select the Up icon to set the direction of the Slide entrance effect. Leave the Duration set at 0.5.
  • 19
    Select Apply.
  • 20
    Select the blue bar beside the third image.
  • 21
    Select the handle at the left end and drag it to the 3-second mark.
  • 22
    This sets the image to appear at 3.0 seconds, based on the audio file.
  • 23
    Select the pencil icon.
  • 24
    Select the Entrance Effect drop down list.
  • 25
    Select Slide.
  • 26
    Select the Up icon to set the direction of the Slide entrance effect. Leave the Duration set at 0.5.
  • 27
    Select Apply.
  • 28
    You can check your settings by using the Play button on theTimeline panel or by doing a Current Page Preview.
  0     0

Similar Projects

Questions  ( 0 )